WPLED104 INSTALLATION INSTRUCTIONS
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: [email protected]
WIRING
Universal voltage driver permits operation at 120V thru
277V, 50 or 60 Hz except fixtures factory ordered with a 120V
swivel photocell (/PCS) or 277V swivel photocell (/PCS2).
Units ordered with (/480V) suffix are 480V.
1.
Connect the black fixture lead to the (+) LINE supply lead.
2.
Connect the white fixture lead to the (-) COMMON supply
lead.
3.
Connect the GROUND wire from fixture to supply
ground.
LIGHT
FIXTURE
(+)LINE
BLACK
(-)COMMON WHITE
GROUND
GROUND
Easy Installation & Product Help
Tech Help Line
Call our experts 888 RAB-1000
©2016 RAB LIGHTING Inc.
Northvale, New Jersey 07647 USA
rabweb.com
Visit our website for product info
Answered promptly [email protected]
Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation,
operation or maintenance.
WPLED104 IN 0916
US:
pat. D653,377;
CN:
ZL201130356930.8;
MX:
36921;
CA:
D - RAB Lighting, Inc
TROUBLESHOOTING
1. Check that the line voltage at fixture is correct.
2. Is there voltage at the lamp fixture wires? If there is no
voltage, check all connections.
3. Is the fixture grounded properly?
PHOTOCELL INSTALLATION
Photocell may be installed in the field. Apply weatherproof
silicone sealant to all plugs and unused conduit entries.
1. Remove close up plug on top of the wall mounting box.
2. Install photocell and wire as per diagram.
3. Use photocell rated for your supply voltage.
“COM”
PHOTOCELL
WP2FC
WHITE
PHOTOCELL
