TRIBORO TBLED 32W 48W 64W 95W
INSTALLATION INSTRUCTIONS
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: [email protected]
®
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
.
RAB fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is
required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing or maintaining fixture. No user serviceable parts inside.
POLE MOUNTING
1. Open the
Door
by pressing the
Tool-Less Entry
Latches.
2. The
Housing
fits on 1in to 2-3/8in
Pole Tenon
. Based
on the tenon arm diameter, carefully knockout the
appropriate
Pole Cover
.
3. Slide the
Housing
through
Pole Bracket
on the
Pole
Tenon
.
Pole Mounting Clamp
along with hardware
provided.
4. The
Housing
can be mounted at -5 degree, -2.5 degree,
0 degree, 2.5 degree and 5 degree shown in circle in
Fig. 1 and Fig. 2. Use
Leveling Bubble
to level
Housing
.
Note:
Housing
is mounted at 0 degree in Fig. 2.
5. Secure Housing on pole using
Pole Mounting Clamp
and tightening
Bolts (2)
provided.
6. Make necessary connections according to NEC and local
codes to
Terminal Block
in
Housing
.
7. Close the
Door.
Housing
Pole Tenon
-5°
-2.5°
0°
2.5°
5°
Fig.2
TRIBORO 32W/ 48W/ 64W with PCT
TRIBORO 95W with PCT
Pole Mounting
Clamp
Bolts (2)
Leveling
Bubble
Terminal Block
Tool-Less Entry Latch
Door
Fig.1
Housing
Pole Cover
Pending:
Pat. pending
