TRIBORO TBLED 32W 48W 64W 95W
INSTALLATION INSTRUCTIONS
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: [email protected]
®
CLEANING & MAINTENANCE
CAUTION: Be sure fixture temperature is cool enough
to touch. Do not clean or maintain while fixture is
energized.
1.
Lens should be washed in a solution of warm water and
any mild, non abrasive household detergent, rinsed with
clean water and wiped dry.
2.
Do not open fixture to clean the LED. Do not touch the
LED.
TROUBLESHOOTING
1.
Check that the line voltage at fixture is correct. Refer to
wiring directions.
2.
Be sure the fixture is grounded properly.
3.
Is the photocell functioning properly (if used)?
Fig. 3
0-10V DIMMABLE WIRING
Universal voltage driver permits operation at 120V thru 277V,
50 or 60 Hz. Units ordered with (/480/D10) suffix operate at
480V, 50Hz/ 60Hz. Factory ordered fixtures with suffix (/PCTx)
is with 7 pin receptacle and 3pin twist-lock photocell, where
x=4 operates at 480V and x=blank operates at 120-277V. 10KV
surge protector provided with the fixture. For 0-10V Dimming,
follow the wiring directions as in Fig. 3.
1.
Connect the black fixture lead to the LINE supply lead.
2.
Connect the white fixture lead to the COMMON supply
lead.
3.
Connect the GROUND wire from fixture to supply ground.
Do NOT connect the GROUND of the dimming fixture to
the output.
4.
The purple fixture lead is connected to the purple of the 7
pin receptacle.
5.
The gray fixture lead is connected to the gray of the 7 pin
receptacle.
6.
Cap the yellow fixture lead, if present. Do NOT connect.
Easy Installation & Product Help
Tech Help Line
Call our experts 888 RAB-1000
©2016 RAB LIGHTING Inc.
Northvale, New Jersey 07647 USA
rabweb.com
Visit our website for product info
Answered promptly [email protected]
TRIBORO 32-95W-IN-1116
Fig. 3
Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during
installation, operation or maintenance.
7 PIN RECEPTACLE
Triboro is supplied with 7 pin receptacle wired in the
fixture as standard.
Brown and Orange wires from the receptacle are not
connected and are reserved to DALI or other control
systems.
to 7 PIN RECEPTACLE
to 7 PIN RECEPTACLE
