RAB Lighting TALLPACK, Installation Instructions

Page: 2 / 2

TALLPACK INSTALLATION INSTRUCTIONS
(continued)
MOUNTING
Bottom Conduit Mounting:
1. With front housing and refl ector off, knockout
the bottom conduit hole in the rear housing.
2. Pull service wires through the conduit opening and
make connection as indicated under Wiring section.
3. Replace the refl ector and refractor cover.
4. Attach to wall box per “Odd-sized Box Mounting”,
instructions #2 & 3 on previous page.
WIRING
Use supply wire rated for 90°C.
Caution: Check that voltage is compatible with fi xture ballast.
1. Connect the black fi xture lead to the black supply lead.
2. Connect the white fi xture lead to the white supply lead.
3. Connect supply ground wire to fi xture ground screw.
RE-LAMPING
Caution: Prior to installing, check that the lamp is of the proper type and wattage. Observe lamp manufacturers
recommendations on lamp operation, ballast type and burning positions. Disconnect power. Make sure fi xture and
lamp are cool enough to touch.
REPLACEMENT LAMPS
High Pressure Sodium ANSI Fluorescent
Wattage Catalog # Code Wattage Catalog #
35 LHPS35 S76 28 LCFL28
50 LHPS50 S68 42 LCFL42
70 LHPS70 S62
CLEANING
Caution:
Be sure fi xture is cool enough to touch. Be sure power is off.
Clean refl ector and refractor with a cloth moistened with non abrasive, non fl ammable glass cleaning solution.
TROUBLE SHOOTING CHECKLIST
Check that:
1. Proper lamp is installed. Lamp is not faulty.
2. Line voltage at the fi xture is proper.
EASY INSTALLATION & PRODUCT HELP
Fax Back Tech Help Line Website e-mail
888-RAB-1236 8AM – 5PM ET Mon. – Fri. www.rabweb.com sales@rabweb.com
888-RAB-1000
Over 28 warehouses nationwide!
1. Remove front refractor following instructions
under Mounting section.
2. Remove old lamp.
3. Place lamp into lamp socket securely until it is
fi rmly seated.
4. Replace front refractor.
Wattage Catalog # Code Wattage Catalog # Wattage Catalog # Code Wattage Catalog # Wattage Catalog # Code Wattage Catalog # Wattage Catalog # Code Wattage Catalog # Wattage Catalog # Code Wattage Catalog #
3. Fixture is wired properly.
4. Fixture is grounded properly.
THESE INSTRUCTIONS DO NOT COVER ALL
DETAILS OR VARIATIONS IN EQUIPMENT,
NOR DO THEY PROVIDE FOR EVERY POSSIBLE
CONTINGENCY TO BE MET IN CONNECTION WITH
INSTALLATION, OPERATION OR MAINTENANCE.
©2005 RAB Lighting, Inc.
Rear Housing
Conduit Knockout
Photocell
(not applicable
for NPC fi xtures)
for NPC fi xtures)