How Does the Super Stealth 360 Work?
The STL360’s infrared sensor “sees” temperature changes
caused by the motion of people or cars within
its protection zone and turns on lights automatically.
It welcomes visitors and may deter intruders.
Total coverage. Two sensors in one.
Two powerful detectors combine
to give the STL360 “Can’t Miss”
Detection: 180° long forward
range (180° x 60’) plus
superb 360° detection
below and to all sides.
How do the scanning LED detection indicators work?
Scanning LEDs serve as a deterrent by indicating a securi-
ty device in operation. They also show the STL360’s
mode of operation:
On Guard
: When the STL360 is “On Guard” in Auto mode,
three red LEDs scan continu-
ously day and night, except
during detections (at which
time the controlled lights
will go on).
Test Mode:
When the
sensor is in “Test Mode”
all the LEDs will be off.
If the sensor is set for
night-only operation, the
LED stays “On Guard”
(daytime detections do
not turn on the lights).
Manual Override Mode:
In “Manual Override
Mode,” the middle LED
will be on. (see page 14)
Howhe
SuperSTL360 360 Work?
How
Does the Super Stealth 360 Work?
How long do the lights stay on?
Lights remain on as long as there is movement within the
protection zone. Once the zone is vacated lights can be
adjusted to remain on from approximately 5 seconds up
to 12 minutes. Since the lights are on only when needed,
and the sensor uses only one watt, the STL360 is
extremely energy efficient.
Can lights still be turned on with the light switch?
Yes. STL360 can be controlled by a conventional indoor
switch or circuit breaker. The STL360 operates in Auto
Mode unless changed. The light can be turned on or off
manually at night only. (see pages 13-14 for more info.)
■
Manual Override Mode
(to keep lights on):
Flip the switch twice slowly (off-on-off-on) within 1-2 secs.
■
Evening Timer
(to keep lights on for a set period each
night): Flip the switch three times slowly (off-on-off-on-off-
on) within 2-3 secs.
■
To Resume Auto Mode
:
Switch power off for at least 10 seconds, then back on.
Will STL360 detect animals?
STL360 may detect large animals. Having animals trigger
the sensor can give property a “lived-in” look. However,
you can limit animal detection by turning down the sensi-
tivity knob and/or placing the blinders provided on the
lower part of the forward lens.
How do you make
adjustments to the sensor?
Use the adjustment
tool provided, or a screwdriver
with a
1
⁄
8
” wide blade,
to adjust the controls on the
front of the sensor.
(see page 11-12)
2
“On Guard Auto Mode”
LEDs scan continuously back & forth
“Ready for Manual Override Mode"
Middle LED on
“Test Mode" All LEDs off
controls
TIME
1 8 HRS
5 SECS 12 MINS
– +
EVENING
TIMER
SENS
1
