LOTBLASTER 65W 110W 160W INSTALLATION
INSTRUCTIONS
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: [email protected]
™
3” Bolt (2)
Screw
Cover
VARIABLE BOLSTER PLATE DETAIL
For non-RAB poles use these dimensions to drill the pole.
This template is not to scale.
Tighten Screws to
required spacing of
2” to 5” (marked on
Variable Bolster Plate)
Threaded holes for
3/8-16 Screw Caps
MOUNTING UNIVERSAL POLE
ADAPTER TO ROUND POLE
Follow steps below to mount the
Universal Pole Adaptor
(UPA)
to
Round Pole (not supplied)
. Refer to Variable
Bolster Plate Detail regarding drill hole spacing on pole.
1.
Adjust
Bracket
on
Variable Bolster Plate
to desired bolt
spacing and tighen
Screw (2)
. Refer to Variable Bolster
Plate Detail for more information.
2.
For
Round Pole (not supplied)
, use
Gasket for Round
Pole.
Discard Gasket for Square Pole.
3.
Line up
Universal Pole Adaptor (UPA)
,
Gasket for
Round Pole
, top hole on the
Round Pole
and top hole
on
Variable Bolster Plate
.
4.
Feed supply wires from center opening of
Round Pole
through gaskets and
UPA
.
5.
Thread
3” Bolts (2)
along with washers and lockwashers
(supplied) through
UPA
and tightly secure to
Variable
Bolster Plate
.
6.
Insert the
Screw Cover.
7.
Refer to Mounting fixture to Universal Pole Adapter to
mount
Housing
to
UPA.
Variable
Bolster Plate
Square
Pole (not
supplied)
Bracket
Screw (2)
Gasket
for Round
Pole
Universal
Pole Adaptor