background image

LOS800CA Smart Switch requires
no maintenance other than keeping 
the lens area clean and free of 
obstructions. Do not attempt to open 
or repair the unit. There are dangerous 
voltages inside the case and no user 
serviceable parts.
Your LOS800CA will be replaced or 
repaired, at our option, if it proves 
to be defective in workmanship or 
materials within one year from the 
date of original purchase. 
For repair or replacement, return the 
product freight prepaid and insured 
to the address below. The LOS800CA 
should be packed carefully. Please 
include your sales receipt and a 
description of the problem. 

If your unit is out of warranty or the 
damage is unrelated to its original 
manufacture, return your unit directly to 
RAB with a check for $20.00 (payable 
to RAB Lighting). We will repair or 
replace the unit.
Under no circumstances shall we 
be liable for any incidental or conse-
quential damages arising out of or 
in connection with the use or perfor-
mance of this product or other 
indirect damages with respect to 
loss of property or revenue or cost of 
installation, removal or reinstallation. 
This warranty gives you specific legal 
rights and you may also have other 
rights which vary from state to state. 

8

Limited Warranty

Easy Installation & Product Help

LOS800CA-IN-0708

Summary of Contents for LOS800CA






Reviews: