RAB Lighting FXLED, Installation Instructions Manual

Page: 68 / 82

Solid GREEN when connected to your
Lightcloud network. Blinking RED when not
connected. The device will automatically
continue trying to connect to a network
in Setup Mode.
Illuminates when the device receives a
message and indicates the strength of
the signal.
3 - Best signal
2 - Acceptable signal
1 - Unacceptable signal
Consult the “Finding a Location” section
for more information
5
STATUS INDICATOR
SIGNAL INDICATOR
Confirm Device Connectivity
• Illuminated when device is powered
• Press once to highlight this device in the
Lightcloud Application
•
• Press twice and hold to set dim level Press twice to toggle circuit on and o ff
• Press and hold for 10 seconds to remove
this device from a Lightcloud network
• Blinks when device is indicated from the
Lightcloud Application
DEVICE IDENTIFICATION BUTTON
Confirm Status Indicator is Solid Green (see details below)
Cont
roll
er
Li
ghtcloud
™
Log on to
www.lightcloud.com
or call
1 (844) LIGHTCLOUD
6
Commission your devices