RAB Lighting FXLED, Installation Instructions Manual

Page: 48 / 82

Setup & Installation
(cont’d)
For setup and maintenance, we provide two
Lightcloud Device Tables with the Gateway:
one that you can attach to your panel and one
to hand off to a building manager. Attach the
Device Identification stickers included with each
device to a row, then write in additional informa-
tion, such as Zone name, Panel/Circuit Number,
and whether or not a zone uses dimming.
DEVICE IDs
ZONE NAME
PANEL/
CIRCUIT #
3
Labeling your device 4
Power up
To add your Lightcloud Dimmer to your system,
enable Setup Mode via the Lightcloud application
or call RAB at 1 (844) 544-4825. When the
Dimmer powers up, it will automatically try to
join, and keep trying until it is able to join.
If you are installing multiple
devices, you may wait until
they are all installed to enable
Setup Mode.
When all devices have been
commissioned, remember
to disable Setup Mode.
ON
5
Confirm device connectivity
Confirm Network Status Indicator is solid
green (see details below).