R3 ECHORING ER--EB 1000M, User Manual, Page: 12 / 15

http://echoring.com
Revision: 1.2
2. In Web User Interface, take a look at ”Echoring Deployment”. Connected devices are
shown in the paring view there. Click the IP address to pair all devices or click each
device to include/exclude it.
3. Click the ”Configure Deployment” button underneath to continue.
4. Please determine the MAC address of the device to be connected and enter it to the
right of the device’s (Node) IP address.
5. Capacity Factor configures the number of available transmission slots for each device,
allowing for greater data throughput, asymmetric traffic or synchronicity optimization
per device, in relation to overall network capacity (configured later).
TIP — To determine the required capacity factor for each device, analyze the traffic and corresponding
data rate that each device transmits, in relation to all devices in the network. Then portion out capacity
factors accordingly.
i
EXAMPLE — 3 devices have a combined network data rate of 200 kb/s,
1 device has 2 capacity factors = 100 kb/s,
2 devices have 1 capacity factor each = 50 kb/s each
6. Apply prioritized traffic filter (if needed) in bottom field under “Priority Traffic” by
entering the prioritized data’s Byte Index , counted from the start of the MAC header,
and its Byte Value .
i
EXAMPLE — Profinet:
EtherType
MAC header 0x88 0x92
←
Byte Values
|
−−−−−−−−−−−−−−−−−−−−−−→
|
−−−−→
|
Byte index 12 13
5. Web­based Configuration Interface
Page 8 of 11
© by R3 – Reliable Real­time Radio