4.2.4 Set Up and Access Web User Interface
The webbased configuration interface is used for configuring, deploying and updating
devices.
1. Set up and connect a PC running the R3 Configuration Server and the Bridge E devices
1
, intended to be in the same network or subnetwork, to the switch
4
, according to
Figure 4IV:
1
1
1
2
2
2
3
3
3
4
5
Figure 4IV: Configuration setup
2. Turn on the network switch.
3. Start the R3 Launcher application and start the Configuration Server. The Configuration
Server needs an IP address on the EchoRing interface (either from ICS, a DHCP server,
or assigned manually).
4. Open a web browser and enter the URL
TIP
— The webbased user interface is designed for the web browsers Firefox (version 100 or newer)
and Chrome (version 100 or newer). Other browsers may not support full functions.
5. Turn on the Bridge E devices.
4. Installation
Page 12 of 45
