R2 RINALDI MT, Instruction And Maintenance Manual

Page: 10 / 32

10 10
ENGLISH
5 – Accident prevention
(*note 4 mod. hi)
Most accidents that happen at work, during the maintenance or the shifting of a machine, are due to
negligence in the observance of the most elementary rules of accident prevention.
It is, therefore, necessary that whoever uses the machine read and respect the rules written below
and the ones on the adhesive stickers of the machine.
1. Verify that on the machine are stuck all the security signs and that they are readable.
2. Before cleaning the machine, making any adjustments or reparations, turn off the two-wheel
tractor engine. Before each operation put the machine on the floor or on steady supports.
3. Never approach to the machine moving parts.
4. The mill grader mod. MT – MTL – MThi – MTLhi has been manufactured for a specialized
use. It must, therefore, always be in perfect working conditions and only R2 spare parts
should be used when making any reparations.
5. Before using the machine, check the tightening of the nuts and screws, in particular those of
the hoes.
6. Keep away all the people or animals before starting to work.
7.
Be careful when working alongside roads, pathways or sloping ground. Follow the instructions
listed in the two-wheel tractor's manual before using it on sloping surfaces.
8. Do not leave the machine working without supervision.
9. While checking or repairing or cleaning the machine, be sure that nobody can start it up
accidentally.
10. Wear tight-fitting clothes that do not cause any footholds in the rotating parts of the machine.
11. Do not climb on the machine at work.
12. Do not interfere with objects on the machine while working.
13. Never use the machine without the back roller or without the protections delivered with the
machine. Never remove the protections.
14. In order to adjust the front protection , always turn off the two wheel-tractor engine and make
this operation safely.
15. In case the machine blocks, before making any reparations, turn off the two-wheel tractor (or
tractor) engine and remove the key.
16. Always read the instruction booklet of the two-wheel tractor before fitting and using the R2
machine. Do not remove or evade the security systems of the two-wheel tractor; before start
working, be sure that the security systems of the two-wheel tractor work correctly; if not, do
not use the machine.
17. Do not carry people , animals or objects on the machine.
18. In case of road traffic respect the regulations in force in your country; put on the machine all
the signals required.
19. Do not place the body under the machine lifted from the ground.
20. Adjust the scraper with the two-wheel tractor engine off and the ignition key disconnected.