38
/ 42
User Manual
Rev. 1.0 - 29/06/12
URPT/MIC & URPR/MIC
ELETTRONICA
6.4.2 Setup Menu (Set)
This menu lets you view and set operating frequency.
Menu 5
F1
Operating frequency setup. Set a new frequency value and then press the
ENTER
button to confirm your selection; the receiver unlocks from current
frequency (the
LOCK
LED turns off) and will lock to the new operating
frequency (
LOCK
turns back on again).
If you press
ESC
or let the preset time time out, the previous frequency
setting is retained.
RF
Visualization of the reading of RF level.
Att
Adjusting of the attenuation on input, expressed in dB.
6.4.3 Audio Menu (Audio)
In this menu, the balanced and unbalanced channel output levels are depicted with
vertical bars, as shown in the following figure. The hatched pointer indicates the
level that corresponds with the total deviation at 100%, and is useful to regulate
the output levels of the audio channel.
Menu 6
Bal
Visualization of the balanced output channel Vmeter.
Unb
Visualization of the balanced output channel Vmeter.
