TRDS4001
15 / 18
User Manual
Rev. 5.2 - 23/06/06
6. Installation Procedures
6.1 Introduction
This chapter contains the useful information for the TRDS4001 installation and
preliminary check-in.
The R.V.R. ELETTRONICA S.p.A. supplies the following equipment:
1.
N. 1 19" 1U rack, which contains the TRDS4001 RDS codifier;
2.
N. 1 VDE cable for the A.C. supply of the system;
3.
N. 1 CD-Rom with WinRDS software;
4.
N. 1 pin to pin DB9 serial connection cable, male and female;
5.
Manual.
In case of the personal computer is not equipped of a DB9 type serial gate, but of a
DB25 type one, the cable has to be realized as showed in the following screen:
6.2 Unpacking
Unpack the equipment and, before any other operation, check the unity for any
shipping damage and check that all controls placed on the front and the rear panel
are useable.
6.3 Installation Instructions
For the installation and the use of the system are necessary the following not
supplied accessories:
1.
Cables for the mono and stereo signals entrance to the TRDS4001 (BNC
side TRDS4001);
2.
Cables for the connection between codifier and transmitter (BNC side
TRDS4001);
