R.V.R. Elettronica TRDS4001 User Manual Download Page 11

TRDS4001

 

7 / 18

User Manual

Rev. 5.2 - 23/06/06

4. General Description

4.1 Introduction

The necessity to immediately know the working parameters of several device in a

system or to transmit with all the several units which have to manage a firm, is a

more and more greater need in all circles.

The cordless broadcasting , for its simple installation and its great pliability, appears

as the more suitable solution in many circles.

In the broadcasting field too, the need to transmit not only the radio signals, but

also data package of different kinds, is already strongly felt for many years, because

it allows to better the quality and the reliability of the available services and at the

end to implement the new ones.

This necessity is also felt in the international field, so much that a proper research

team has constituted itself to identify the different necessities and to determine a

broadcasting standard which would appear more proper for the sector.

The team has reached the "RADIO-DATA-SYSTEM (RDS)", which appears todays

the data broadcasting system more used in the radio field.

The TRDS4001 system allows to transmit, with the radio signal (mono or stereo),

a data channel as specified in the paper "Specification of the radio data system

(RDS)",  which  is  issued  by  the  European  Committee  for  Electrotechnical

Standardization (CENELEC) Ref. N° EN 50067.

4.2 RDS System Description

The RADIO-DATA-SYSTEM is proper for the transmission of  information in mono/

stereo programs of VHF/MF  (87.5-108 Mhz).

It satisfies the requested requirements to the transmission of supplementary data

on radio programs:

1) Compatibility with the current mono/stereo transmissions;

2) Absence of  interferences towards the adjacent programs;

3) Compatibility with other identification systems which are already working.

The  system,  selected  by  an  international  specialistic  team,  allows  the  data

transmission at a speed of 1187.5 bit/sec with phase modulation at two levels ,

carrier wave 57 Mhz and range ±2 Khz.

The broadcasted binary signal is in advance put out on a differential codification.

Summary of Contents for TRDS4001























Reviews: