R.V.R. Elettronica SDC100, User Manual

Page: 16 / 88

SDC100
12 / 42 User Manual Rev. 3.0 - 09/10/01
6.2 Rear Panel
figure 6.2
[1] VOLTAGE CHANGER & Fuse block and line voltage selector. Use a small screwdriver to
A.C. LINE FUSE change the fuse or line voltage. Rotate the block and position it
for the desired voltage.
[2] MAINS VOLTAGE A.C. power line socket
[3] 24VDC Plug for the external 24Vdc supply
[4] RS-232C DB9 connector for direct or modem serial communication
(only with RDS card)
[5] TELEMETRY Telemetry DB9 connector of optiona board (only with RDS card)
[6] R.D.S. LEVEL ADJ Trimmer for phase adjustments (only with RDS card)
[7] R.D.S.OUTPUT RDS output connector, BNC type
[8] PHASE ADJ Trimmer for phase adjustments (not present)
[9] 19KHz OUTPUT 19KHz output connector, BNC type
[10] MPX1 OUT LEVEL ADJ Trimmer for MPX1 output level adjustment
[11] MPX1 OUTPUT MPX1 output connector, BNC type
[12] MPX2 OUT LEVEL ADJ Trimmer for MPX2 output level adjustment
[13] MPX2 OUTPUT MPX2 output connector, BNC type
[14] SCA/RDS LEVEL ADJ Trimmer for SCA2/RDS input level adjustment
[15] SCA2/RDS INPUT SCA2/RDS input connector, BNC type
[16] SCA1 LEVEL ADJ Trimmer for SCA1 input level adjustment
[17] SCA1 INPUT SCA1 input connector, BNC type
[18] LEFT LEVEL ADJ Trimmer for left input level adjustment
[19] LEFT INPUT Left input connector, XLR female type
[20] RIGHT LEVEL ADJ Trimmer for right input level adjustment
[21] RIGHT INPUT Right input connector, XLR female type