14 / 54
User Manual
Rev. 1.2 - 24/01/11
PTX-DDS
If no controls are operated during 2 minutes, the exciter returns to the default
menu (see chap. 7.4.1), and after 5 minutes of inactivity the display lighting will
be turning off.
7.2 Start-up
Upon switch-on, a window that holds the RVR logo and machine informations
appears on the display. The informations regards the firmware release and the
programming table.
Note:
during the start-up operation don’t press or turn the encoder. To reset the
factory parameters read chapter 7.5.
PTDS-000100 01/08/2005
BIOS-000300 01/08/2005
Figure 7.2
Otherwise, in substitution of the RVR logo, are available informations regarding
equipment personalization, arranged on three rows of 16 characters.
ŕőőőőőőőőőőőőőőőőőőőőőŘ
Œ
Xyz
1
Œ
Œ
Xyz
2
Œ
Œ
Xyz
3
Œ
śőőőőőőőőőőőőőőőőőőőőőŞ
PTDS-000100 01/08/2005
BIOS-000300 01/08/2005
Figure 7.3
After approximately 10 seconds this screen is replaced with the default screen
(see chap. 7.4.1).
7.3 Operating System
The
PTX-DDS
menu system consists of a default menu and set of administration
menus.
The logic of the organization of the display is represented in the figures belows.
