14 / 38
User Manual
Rev. 1.0 - 29/06/09
PJ2500M-C, PJ3000HE, PJ3500M-C,
PJ4000U-K & PJ5000U-K
It consists of a certain number of lines each of which contains the name of the
variable controlled by the protection system and the type of intervention carried
out by the system.
Said intervention may be as follows:
X - (Y)
,
Wait
, or
Dis
. (Disabled).
The aspect of this menu is as follows (only two lines can be seen at a time, use
the UP and DOWN keys to scroll through it):
The task of this menu is essentially to help the technician in identifying the possible
causes of any malfunction.
5.3.6 Miscellaneous Menu
In this menu the user may:
•
set the address in the serial bus connection, type I
2
C
• set the main menu display mode
The network address I
2
C is very important when the amplifier is connected in an
RVR transmission system that envisages the use of this protocol. Do not change
it for any reason whatsoever.
The main menu may be displayed either in
Dig
ital mode (this is the standard
mode) or
An
a
l
og mode:
