PJ2000M-C, PJ2500M-C & PJ3000M-C
34 / 40
User Manual
Rev. 1.5 - 09/10/09
8.1.3 Voltage Change
WARNING:
the single-phase power supply may be used only with 208/230
Volts.
Proceed as follows to change voltage inside the machine:
• Make the JP3 connection, on the Rectifier card, between PIN 1 and 2 to select
230 Volts, or between PIN 2 and 3 for 115 Volts.
Figure 8-1: Connection for the selection of 115 or 208/230 Volts
• In order to select the 230 Volts on the connector inside the PS section near
the transformer, make the connection between PIN 3 and 4 and PIN 6 and 7,
or between PIN 2 and 3 and PIN 5 and 6 for 115 Volts.
