PJ2000M-C, PJ2500M-C & PJ3000M-C
14 / 40
User Manual
Rev. 1.5 - 09/10/09
The task of this menu is essentially to help the technician in identifying the possible
causes of any malfunction.
5.3.6 Miscellaneous Menu
In this menu the user may:
•
set the address in the serial bus connection, type I
2
C
• set the main menu display mode
The network address I
2
C is very important when the amplifier is connected in an
RVR transmission system that envisages the use of this protocol. Do not change
it for any reason whatsoever.
The main menu may be displayed either in
Dig
ital mode (this is the standard
mode) or
An
a
l
og mode:
In the analog display mode a small triangle indicates the reflected power level
set in the Alarm Threshold Setting Menu (RflWar), whereas the bar at the bottom
shows the instant reflected power level.
This type of display might be useful when a device to be tuned is connected to the
amplifier’s output such as a cavity.
