PJ1000C/1300C/2000LCD
ELETTRONICA
17
/ 36
User Manual
Rev. 1.0 - 28/02/11
Menu 2
Next to
SET
indication, a bar provides a graphic display of preset output power.
The filled portion of the bar is proportional to set power level.
Example
100%
output power
Full bar
≅
2000W in output
(mod.PJ2000LCD)
≅
1300W in output
(mod.PJ1300C-LCD)
≅
1000W in output
(mod.PJ1000C-LCD)
50%
output power
Half bar
≅
1000W in uscita
(mod.PJ2000LCD)
≅
650W in output
(mod.PJ1300C-LCD)
≅
500W in output
(mod.PJ1000C-LCD)
25%
output power
1/4 bar
≅
500W in output
(mod.PJ2000LCD)
≅
325W in output
(mod.PJ1300C-LCD)
≅
250W in output
(mod.PJ1000C-LCD)
The bottom line provides instantaneous power reading (1997W in this instance);
press button to increase level, press to decrease it. When you have achieved
the desired level, press
ENTER
to confirm and exit the default menu. Please note
that the setting is stored automatically; in other words, if you press
ESC
or do not
press any keys before the preset time times out, the latest power level set will be
retained.
NOTE:
This feature prevents the machine from delivering maximum power as
soon as output is enabled from menu 4, or in the event the machine is already
set to
ON
and energised.
2) Ensure that machine is not in a locked-out state. Press the
ESC
key (chap.
6.1) to call up the selection screen (Menu 3). Highlight
Fnc
and press
ENTER
to confirm (chap. 6.1) and access the appropriate menu (menu 4).
If
LOC
is set to
REMOTE
(machine remote control), move cursor to
LOC
and
press
ENTER
; label will change to
LOCAL
, i.e. local control operation mode.
