TEX30/50/100/150/300LCD
ELETTRONICA
21
/ 32
User Manual
Rev. 1.0 - 29/11/12
5.4.5 Miscellaneous Menu (Mix)
This menu lets you set equipment address in an I
2
C bus serial connection:
Menu 8
IIC
I
2
C address setting. The I2C network address becomes significant when
the exciter is connected in an RVR transmission system that uses this
protocol. Do not change it unless strictly required.
5.4.6 Version Menu (Vrs)
This screen holds equipment version/release information:
Menu 9
Note that these are readings, rather than settings, and cannot be edited (note the
empty arrow).
Rel
Firmware release information.
Dat
Release date.
Tab
Shows table loaded in the memory.
5.4.7 Channels Menu (L&R)
Right and left channel input levels are displayed as horizontal bars as shown in
the figure below.
The bar meter reflects the level corresponding to a 100% deviation for each channel
and provides a convenient reference when setting audio channel input levels.
Menù 10
L
Left channel Vmeter.
R
Right channel Vmeter..
