R.V.R. Electronica TEX100LCD, User Manual

Page: 13 / 40

TEX30/50/100/150/300LCD
ELETTRONICA
/ 32
User Manual
Rev. 1.0 - 29/11/12
4.6 Technical Description
Parameters TEX30LCD TEX50LCD TEX100LCD TEX150LCD TEX300LCD
GENERALS
Rated output power 30W 50W 100W 150W 300W
Frequency range
Operational Mode
Modulation type
Primary Power 80 ÷ 260 Vac or 24 Vdc 80 ÷ 260 Vac
AC Power Consumption 130 VA / 70W 200 VA /100W 330 VA / 212 W 440 VA / 260 W 560 VA / 520 W
Phisical Dimensions (W x H x D)
Weight 7 kg 8,5 kg 8,5 kg 8,5 kg 9,5 kg
Environmental Working Conditions
Cooling
Frequency programmability
Frequency stability
Pre-emphasis mode
Spurious & harmonic suppression
Asynchronous AM S/N ratio ≥ 65 dB (typical 70) ≥ 60 dB (typical 65)
Synchronous AM S/N ratio ≥ 50 dB (typical 60) ≥ 50 dB (typical 55)
MONO OPERATION
S/N FM Ratio
Frequency Response
Total Harmonic Distortion
Intermodulation distortion
MPX OPERATION
Composite S/N FM Ratio
Frequency Response
Total Harmonic Distortion
Intermodulation distortion
INTERNAL STEREO CODER
OPERATION
Stereo S/N FM Ratio
Frequency Response
Total Harmonic Distortion
Intermodulation distortion
Stereo separation
AUDIO INPUT CONNECTORS
Left / Right
MPX unbalanced/RDS
SCA/RDS
OTHER CONNECTORS
RF Output
RF Monitor
Pilot output
Interlock Input
STANDARD COMPLIANCE
Safety
EMC
Radio
FCC -CCIR - OIRT - JPN
0/50 (CCIR) μ S, 75 (FCC) μ S
<75 dBc (80 typical)
Mono, Stereo, Multiplex
F3E
483 x 88 x 394 mm
115 / 230 ±15% or 28 Vdc
≥ 60 dB (typical 68)
EN 301 489-1 V1.4.1 (2002-08)
EN 301 489-11 V1.2.1 (2002-11)
EN 302 018-2 V1.2.1 (2005-06)
-10 ÷ +50 °C / 95% relative Humidity non condensing
Forced, with internal fan
From software, with 10 kHz steps
±1 ppm
EN 60215:1989
EN60215/A1:1992-07
EN60215/A2:1994-09
≥ 50 dB (typical 58)
> 80 dB RMS (typical 85 dB)
< ± 0.5 dB 30Hz ÷ 15kHz (typical ± 0.2 dB)
< 0.1 % 30 Hz ÷ 15 kHz (typical 0.07 %)
< 0.02 % with 1 kHz and 1,3 kHz tones
> 80 dB RMS (typical 85 dB)
± 0.2 dB 30Hz ÷ 53kHz / ± 0.5 dB 53kHz ÷ 100 kHz
BNC unbalanced; Impedance: 10 k or 50 ohm; Level: -13 to +13 dBu
2 x BNC unbalanced; Impedance: 10 k; Level: -8 to +13 dBu
N (50 ohm)
< 0.1% 30Hz ÷ 53kHz
< 0.05% with 1 kHz and 1,3 kHz tones
> 75 dB RMS (typical 78dB)
± 0.5 dB 30 Hz ÷ 15 kHz
< 0.05% 30 Hz ÷ 15 kHz
≤ 0.03% with 1 kHz and 1,3 kHz tones
BNC (- 30dBr referred to RF output )
BNC (1Vpp)
BNC
> 50 dB 30 Hz ÷ 15 kHz (typical 55 dB)
XLR balanced; Impedance: 10 k or 600 ohm; Level: -13 to +13 dBu