16
/ 26
User Manual
Rev. 1.0 - 22/08/14
TEX1002LCD
Menu 3
If the temperature alarm is enabled and the alarm threshold is exceeded, the
following screen will be displayed (only if you are in the default screen):
State 1
As soon as operating conditions are restored, power output is re-enabled with the
same settings in use prior to the alarm condition.
Under 20kHz, no modulation occurs. After a preset time of about 5 minutes (not
editable), a NO AUDIO condition is indicated in the main screen, but power is not
inhibited.
State 2
To gain access to a submenu, select menu name (name is highlighted by cursor)
using button or and press the
ENTER
button.
To return to the
default menu
(menu 1), simply press
ESC
again.
5.4.1 Operation Menu (Fnc)
In this menu, you can toggle transmitter
power output
On/Off, set
deviation
display mode
and the threshold rate for
Forward
(
PgD
) or
Reflected
(
PgR
)
Power Good.
