![background image](http://html1.mh-extra.com/html/r-tech/tig401-tft/tig401-tft_operation-instructions-manual_4325046053.webp)
53
Fan control system
The machine has 3 intelligent fan control modes.
ON
-
Fan on all the time.
MODE1
-
Fan by thermal sensor
The machine has inbuilt inverter temperature monitoring and when a certain temperature is achieved the
fan will switch on to cool machine down and stop when cooling has been sufficient.
This saves on power consumption and also gives a quieter working environment especially when working
on thin material, so only using low amperage power.
MODE2
-
Fan on arc ignition.
The machine will start the fan as soon as an arc has been established, it will continue to run for 1 minute
after you have finished welding.
To access fan on demand menu, press and hold the RIGHT ARROW and HOME button for 3 seconds and
release
-
the following screen will appear. Press arrow buttons to move to option 5
-
Now use control
knob to select desired mode
-
then press HOME button to return to main menu.