![background image](http://html1.mh-extra.com/html/r-tech/tig401-tft/tig401-tft_operation-instructions-manual_4325046049.webp)
49
Selecting EASY SET parameters
Use the left and right arrow buttons to move between each setting
-
once setting is highlighted in RED
you use the control knob to change. Once you have entered all 5 parameters for weld, move
onto OK so it goes RED (You can also press home button), the recommended welding amperage will be
shown in middle of display.
You can trim this amperage using control knob + /
-
10 amps to suit you personal preference of travel
speed / weld bead characteristics.
1. ELECTRODE TYPE
DC
-
6010, 6011, 6013, 7018, 308, 309, 316
AC
-
6011, 6013, 7018
2. ELECTRODE SIZE
2.4mm, 3.2mm, 4.0mm
-
Note: Rods shown depending on machine maximum amperage.
3. MATERIAL THICKNESS
1.5mm, 2.0mm up to 8mm depending on machine maximum amperage.
4. MATERIAL TYPE
DC Mode
-
Steel or Stainless steel (SS), AC Mode
-
Steel
5. Welding position
Flat, Horizontal, Vertical and Over head
1
2
3
4
5
6