Turn the input power OFF at the mains switch & fuse box before working on this equipment.
Have a qualified electrician install & service this MIG welding equipment.
Allow machine to sit for 5 minutes minimum to allow the power capacitors to discharge before
working inside this equipment. Do not touch electrically live parts
The PRO-MIG250 MIG Welder requires a 240V 50/60Hz 1-Phase 22A supply. It comes with a
2 metre mains cable attached. Connect wires according to national coding.
Brown wire – Live
-
Blue wire – Neutral
-
Green/Yellow Wire – Earth (Ground)
Connecting to an Engine Driven Generator
If connecting this machine to an engine driven generator please ensure the
following
Minimum Generator KVA Output – 7 KVA continuous
Generator to be fitted with AVR (automatic voltage regulation
)
DO NOT USE ON A GENERATOR WITHOUT AVR. Connecting to a
generator without the above minimum requirements may in-validate
your warranty