DECK HEIGHT
ADJUSTMENT
VAC MOTOR
(SEE BELOW)
SOLUTION FILTER
1. The machine is equipped with a 24 volt, 3/4 hp,
vac motor
"A"
.
2. If foam or water gets past the recovery tank's vac
screen/ball system the "UNLOADER VALVE"
"B"
will drain
it from the "VAC BOX"
"C"
.
3. The vac motor has an "optional" "FOAM MUFFLER"
"D"
available for quiet machine operation.
1. The solution system has a "INLINE FILTER"
"A"
to filter
out cleaning solution prior to scrubbing.
(SEE
BELOW)
CLEANING
SOLUTION FILTER
(SEE BELOW)
1. To clean the "SOLUTION FILTER" Unscrew the clear
cap
"A"
from housing
"B"
and remove the "STAINLESS
STEEL"
screen
"C"
.
2. Rinse any debris from the screen with clean water.
3. Reinstall screen and screw cap back on tightly.
PAGE 19
B
C
A
A
A
B
D
C
1.
T
o adjust deck height for brush clearance,
loosen jam nut on adjustment bolt
"A",
turn
adjustment bolt clock-wise to raise deck,
counter-clockwise to lower deck.
Retighten jam nut. (SEE
BELOW
)
A
