Version 16.03.2020
HW:
CAM(V97)/(V30)
CI-RL3-R40
P
a
g
e
12
2.3.2.2.
Warning notes, concerning the installation of ribbon cables
1) The contacting ends of ribbon cables always have to be installed in a straight and
precise 180° position to the connector. Each deviation from a perfect contact position will
curse faulty contact and even danger of short circuit
2) The ribbon cable’s contacting sides always have to correspond to the contacting sides of
the connectors, concerning the mounting position.
3) Avoid cable contusion or cable injury caused by sharp-edged metal.
After a check of the perfect ribbon cable connection, fold back and clip in the head-unit
housing to the monitor panel in reverse order. Then lead the LVDS cable out of the housing
at a suitable location and fix the head units original housing cover plate at the exchange
retaining plate, by using the enclosed 4 metal sleeves.
2.4.
Connection from monitor to the video interface
Connect the female 20pin LVDS connector of the LVDS cable which is led out of the head
unit, to the male 20pin connector of the video interface.
