38
EN
B
ollit
or
e digitale
If the chosen temperature led doesn’t turn on, it means that the water
temperature in the kettle is higher than the temperature itself.
If you don’t press the power button (11) within 15 seconds from the tem-
perature setting, the appliance enters into standby mode.
•
During the functioning it is possible to change the set temperature by pressing the “+/-”
button (12).
EXAMPLE: when the appliance is functioning and the water temperature is 70°C, press the
“+/-” button (12) once or more times to set:
80°C > 90°C > 100°C (all the led turned off) > appliance turned off > ....
•
When it reaches the set temperature, the appliance emits two beeps and the led indicator
(14) turns off. The led corresponding to the set temperature blinks for about 1 minute.
•
To turn off the appliance:
- press the power button (11), or
- lift the kettle (1) from the stand (4), or
- disconnect the plug from the power socket.
TEMPERATURE MAINTENANCE
•
Place the kettle (1) containing water (max 1,7l - min 0,5l) on the stand (4); the appliance
emits two beeps.
• Keep the power button (11) pressed for about 3 seconds, the appliance turns on with
the default temperature set at 50°C.
Press the power button (11) to turn off the appliance.
•
It is possible to set the desired temperature by pressing the “+/-” button (12) (the corre-
sponding led blinks).
50°C > 70°C > 80°C > 90°C > 100°C (all the led turned off) > 50°C > ....
