20
R/Evolution 2530 Getting Started Guide • March 2009
12. If you attached the optional front support brackets to the rack face, remove those
brackets.
Note –
When you finish installing an enclosure, you may have unused screws left
in your rack kit. Screws are included for different rack types and configurations, and
extra screws are provided in case any are misplaced.
Attaching the Ear Caps
The plastic ear caps are snap-on parts that require some care when attaching or
removing them. After the enclosure has been installed in the rack cabinet, attach the
ear caps, which are located in a plastic bag included in the controller and drive
enclosure packages.
1. Remove the ear caps from the plastic package.
2. As you attach each ear cap, hold it so that its indent is closest to the chassis.
3. Apply gentle pressure to snap the caps onto the chassis’ ears.
Figure 2-3
Installing Ear Caps
Indent
Indent
