13
CH A P T E R
2
Installing and Cabling Enclosures
This chapter describes how to install and cable enclosures in a standard 19-inch EIA
rack cabinet.
Before you begin installing the system, you must prepare the site as described in the
site planning guide
and learn of any late-breaking information in the
release notes
for your system.
Required Tools
The installation procedures in this chapter require the following tools:
■
#2 Phillips screwdriver
■
Allen wrench (provided; used with 6-mm screws)
■
Antistatic protection devices
Safety Precautions
For your protection, observe the following safety precautions when setting up your
equipment:
■
Install the system in accordance with the local safety codes and regulations at the
facility site. Follow all cautions and instructions marked on the equipment.
■
Ensure that the voltage and frequency of your power source match the voltage
and frequency inscribed on the equipment’s electrical rating label.
■
Never push objects of any kind through openings in the equipment. Dangerous
voltages may be present. Conductive foreign objects could produce a short circuit
that could cause fire, electric shock, or damage to your equipment.
Note –
Do not make mechanical or electrical modifications to the product. The
vendor is not responsible for the safety or regulatory compliance of a modified
product.
