4
Installing your UV Disinfection system:
• The ideal installation is vertical, with the inlet at the bottom and the outlet at
the top (side).
• The complete water system, including any pressure or hot water tanks, must be
disinfected before start up by flushing with chlorine (household bleach) to
destroy any residual contamination.
• For safety purposes, the disinfection system should be connected to a ground
fault interrupt circuit.
• The disinfection system is intended for indoor use only, do not install
disinfection system where it may be exposed to the weather.
• Install the disinfection system on cold water line only.
• If treating the entire house, install the disinfection system before any branch
lines.
• A 5 micron sediment filter must precede the disinfection system. Ideally, the
disinfection system should be the last treatment the water receives before it
reaches the faucet.
coppercopper
