9
BA_BM_ERGOPLAN-1-2-3_EN_46-21.docx
4.4
Consequences in Case of Disregard
If the work and assembly bench is not operated, maintained or repaired in accordance with the safety regula-
tions, not as intended, improperly or in an abusive manner, the following will result:
Dangers to the health of the operating personnel
Dangers to the work and assembly bench and objects in its vicinity
Impairment of the work and assembly bench function
In case of improper use of the work and assembly bench, any warranty, liability and other claims for damages
of the operator against the manufacturer are excluded!
4.5
Conversions and Modifications of Ergoplan
Only use the work and assembly bench in its original condition, i.e. as delivered!
The components of the work and assembly bench must not be changed in their type and condition.
Only original spare parts and accessories from the manufacturer (see
16) may be used.
Deviations are not permitted.
Unauthorized modifications or conversions by the operator, without the written consent of
the manufacturer, are prohibited. This excludes any warranty, liability and other claims for
damages by the operator against the manufacturer!
4.6
Load Distribution and Influence on the Nominal Load
The nominal, maximum permissible load of Ergoplan is based on a load evenly distributed on the platform. If the
load cannot be distributed evenly on the platform, the maximum permissible load must be reduced according to
the figures below.
Figure 1: Permissible load with load distribution
Even distribution
Load is evenly distributed
over the entire platform area
→
100 % of the nominal load
is permissible.
Uneven distribution
Load is distributed over half of the
platform in transverse direction
→
50 % of the nominal load
is permissible.
Uneven distribution
Load is distributed over half of the
platform in longitudinal direction
→
33 % of the nominal load
is permissible.
max. 100 %
max. 50 %
max. 33 %
