4
BA_BM_ERGOPLAN-1-2-3_EN_46-21.docx
1
Introduction
The information in this operating manual enables safe, proper and economical operation of your work and as-
sembly bench. Please observe all the explanations, notes and regulations
•
to avoid dangers and malfunctions,
•
to reduce repair costs and downtimes
•
and to increase reliability and service life
of your work and assembly bench.
The operating manual must be read and used by each person entrusted with carrying out work with the work
and assembly bench. This must be ensured by the operator. Further this manual as well as any appendices and
additional documents must be kept easily accessible at the place of use of the work and assembly bench.
Ignorance or non-observance of these operating instructions may result in certain accident
hazards during handling with the work and assembly bench. Before commissioning, this op-
erating manual and any appendices and additional documents must be read thoroughly. All
instructions, in particular the safety regulations, must be observed!
Handling
the work and assembly bench in the sense of these instructions means
•
the installation and commissioning,
•
the operation and proper usage,
•
the influence on operating conditions, as well as
•
the maintenance, troubleshooting and repair.
Apart from the operating manual and the legally binding accident prevention provisions applicable in the country
and place of use, the recognized technical regulations for safe and proper work must also be observed.
1.1
Legal Notice
All contents of these operating instructions are subject to the rights of use and copyright of Reinhold Beck Mas-
chinenbau GmbH. Any reproduction, modification, further use and publication in other electronic or printed me-
dia, as well as their online publication, requires the prior written consent of Reinhold Beck Maschinenbau GmbH.
1.2
Illustrations
All photos, figures and graphics contained in this document are for illustration and better understanding only
and may differ from the current state of the product.
2
Symbols
2.1
General Symbols
Symbol
Meaning
Indicates passages within this operating manual that must be particularly observed in order to
prevent malfunctions or damage to the work and assembly bench.
Refers to chapters, sections, or figures within this document.
Refers to an external document or a third-party source.
