7
BA_BM_ERGOPLAN-1-2-3_EN_46-21.docx
3.5
Accident Prevention
To avoid accidents, the following rules must be observed for operation:
Prevent unauthorized persons from gaining access to the work and assembly bench.
Keep unauthorized persons away from the danger areas.
Repeatedly inform present other persons about existing residual risks (see section
4.8 "Residual Risks").
Conduct and record regular training & instruction for persons who must be in the area of the work and
assembly bench.
New employees must be trained internally to work on a work and assembly bench and this training must be
documented.
It is not permitted to enter the work and assembly bench platform or to transport resp. lift persons.
3.6
General Safety Regulations
In general, the following safety regulations and obligations apply when handling the work and assembly bench:
The work and assembly bench may only be operated when it is in perfect working order.
It is prohibited to remove, modify or bypass any protective, safety or monitoring equipment.
It is forbidden to modify or alter the work and assembly bench without the written approval of the manu-
facturer / supplier.
Faults or damage must be reported to the operator immediately, eliminated without delay and repaired if
necessary.
Repair and maintenance work on electric, hydraulic, and pneumatic components (e.g. electric drives, hy-
draulic cylinders, vacuum pumps, etc.) may only be performed by authorized and trained personnel.
Maintenance must be carried out and documented in accordance with the maintenance instructions.
For repairs, only original spare parts from the manufacturer may be used.
Only instructed, trained or qualified persons may work on the work and assembly bench.
For the operation of the work and assembly bench, the respective national safety regulations for
employees as well as the national safety and accident prevention regulations apply.
3.7
Standard Equipment
•
Model EP1 with work bench made of red beech wood, 4 feet and trolley for mobile use.
•
Model EP2 with work bench made of red beech wood and 4 feet for stationary use.
•
Planing benches for EP1 and EP2 with front and rear jaws and anti-squeeze cover on rear side.
•
Model EP3 without work bench, as height adjustable ergonomic base for customer specific work benches.
•
Uniform height adjustment even with uneven load distribution or eccentric loading.
•
All three available models are continuously foot-hydraulically height adjustable (via a foot pedal mounted
on the left side with separate pedal surfaces for up/down).
•
With shelf for additional space under the table top (e.g. for base cabinet).
•
CE-compliant design
3.8
Options and Accessories
•
Special accessories and optional components can be found in chapter
