7
BA_BM_HS-300-LARGE_EN_45-21.docx
3
General
The operating manual must be read carefully and understood before handling the
lift table! If anything is unclear, please contact the manufacturer.
The ergonomic HS 300 LARGE double scissor lift table is the largest model in the HS 300 series. With its 1900 x
740 mm support frame, is suitable for very LARGE table tops. The solid construction made of square profiles and
its mobility thanks to four swivel castors make it a universal helper for countless applications in industry and
trade, e.g. for maintenance, assembly and repair work.
Attachable and screwable optional table tops allow individual adaptation to different applications.
3.1
Advantages
•
Double scissors made of square profiles with continuously reinforced bolting for maximum stability
•
The scissor principle ensures a high load-bearing capacity of max. 300 kg (FH) or 350 kg (AH)
•
Back-friendly hydraulic height adjustment by foot (Version FH) or battery (Version AH)
•
Mobility thanks to four swivel castors ensures flexible and versatile use
•
Uniform adjustment to height, even under uneven load distribution
•
Individual application areas can be realised with different table tops
•
High-quality, side-mounted hydraulic unit
3.2
Applications
The lift table can be used for all work corresponding to its intended use in section
4.2. It is suitable for use as
work equipment for transporting, lifting and lowering loads as well as a height-adjustable assembly table. Typical
areas of application are workplaces in manufacturing, assembly and maintenance, where precise height adjust-
ment for ergonomic working as well as high flexibility and mobility are of particular importance.
The lift table must not be used for work that does not correspond to its intended use (see section
3.3
Target Group and Previous Experience
This operating manual is intended for the operating and maintenance personnel of the lift table. The operating
personnel is to be determined by the operator and must further meet the following requirements:
•
Basic technical and mechanical knowledge as well as knowledge of the associated technical terms
•
Reading and understanding these operating and maintenance instructions
In order to acquire the knowledge required to operate this lift table, the operator must ensure the following
measures:
•
Product training for every operator (also possible external personnel)
•
Regular safety instruction
3.4
Requirements for the Operators
The operator is responsible for the safe use of the lift table!
The lift table may only be operated by trained personnel who have also read this manual.
Inspection, maintenance, cleaning and repair may only be performed by technical specialists
with product-specific training and mechanical and/or electrical training.
Specialists with product-specific training are to be commissioned and held responsible for
planning and checking the work.
The national protective regulations for employees must be observed
The legal minimum age must be observed.
