Qwic Premium MN7D, Manual

Page: 42 / 74

42
5. COMPONENTS
5.4 Front fork
Your e-bike is fi tt ed with an adjustable front suspension. The 'preload'
setti
ng needs to be adjusted to the driver's weight. If you feel that the
suspension is not sti ff enough for your purpose, you can increase the
sti ff ness by turning both knobs clockwise.
5.5. Seatpost suspension
It is also possible to adjust the preload of the seatpost suspension. First
loosen the seat clamp and take the seatpost out of the frame. The silver
bus on the bott om side of the seatpost can be rotated in the black outer
tube to adjust the suspension. Use an allan key and rotate clockwise
to ti ghten the suspension or rotate counterclockwise to loosen the
suspension.
bell
Please make sure that the silver bus never protrudes the edge of
the black outer tube. If the silver bus is loosened too far, it can
break loose due to pressure from the spring.
PR
ELOAD
NU
T
5.7. Tires and preferred pressure
The ti res on your bike are suitable for almost all types of terrain, with
good grip on wet asphalt as well. Tire pressure has a large infl uence on
the range of your batt ery and the comfort of your ride. It is advisable to
always keep your ti res at the right pressure, which is indicated on the
sides of the ti re. As a reference, you should be able to slightly compress
the side of the ti re with your thumb when pressing fi rmly.
bell
Check your ti re pressure every 2-4 weeks.
5.8. Rear carrier
Your QWIC Premium e-bike has a custom designed rear carrier. The
carrier is approved for carrying loads up to 25 kg. It can support most
bicycle bags and baskets by means of the integrated MIK system. The
carrier also supports a variety of child seats. Ask your dealer for an
overview of compati ble products or take a look at Mik-Click.com
25
kg