28
If a call comes in via a
telephone system that does
not offer Caller ID service,
no information is stored.
“
End
” appears when
you have reviewed all
messages in the Caller ID
list. Press repeatedly
to return to the summary
screen.
Each message can be up
to 15 characters for the
phone number and the
name.
The Caller ID list stores information for up to 50 incoming calls - even
unanswered calls.
1
Press .
The summary screen appears.
The screen shows the number of new
messages and total messages.
2
Press to display the latest caller
ID message.
3
Press to see the next message.
Or press to see previous message.
4
Press to return to standby.
Long Distance call settings and cancellation
Press while the incoming call
information is displayed
(in step 2) to return a long distance
call. The prefix “
1-
” will be displayed
at the beginning of the phone number when a long distance call is set.
(When the phone number is 15 digits long, only “
1
” is displayed.)
Pressing again will cancel the long distance call setting.
In Caller ID operation, if
no key is pressed for more
than 20 seconds, an error
tone sounds and the
telephone returns to the
standby mode.
QT1960_OM 4/6/01 5:28 PM Page 32
