manualshive.com logo in svg

Qwest Q1960, Owner'S Manual

Share
Download
Qwest Q1960 Owner'S Manual Download Page 25

21

1

Press and hold                  until the
display shows the memory screen and any
saved name/number.

2

Press        and        or enter a two-digit
number (01 - 20) to select the memory
location you would like to edit.

3

Press              .
The following screen appears with the
memory location number that you have
selected in the display.

4

Press the       or       to 
select “

Edit Memory

”, 

then press             .
The following screen appears. 
The cursor flashes indicating that the display is ready for the name to
be edited. When a name has not been stored, the cursor appears at
the beginning of the second line

.

5

Press       ,      ,          ,                  , or          to edit the name. (See
page 17.)
To edit only the phone number, skip this step.

6

Press             .
The following screen appears. 
The cursor flashes indicating 
that the display is ready for 
the number to be edited.

QT1960_OM  4/6/01  5:28 PM  Page 25

Summary of Contents for Q1960















































Reviews:

No comments

Brands by name

Popular brands

Load more brands