background image

4.  Function instruction

        

 

 

Auto flip

     

If user holds the joystick in the down position, the camera rotates pan 180 degrees,

he 

camera rotates tilts up to 90 degrees, you may directly watch the rear view

ocesses in portrait 180 degrees . In the menu, you may set  the system parameter setting AUTO

 FLIP as ON, thus you may run this function.

   

then  t

 to realize surveillance 

all pr

 

Function  instruction

      This passage mainly describes the main function and general principle of mini speed dome, 

and does not refer to the operation methods. 

4. 1  Auto-run motion 

      

IDLE RUM

         By the menu

IDLE RUN

and

idle action

, user may set auto-call preset or run tour, pattern, 

   and scan, etc after pointing a few minutes if the dome doesn't run any motions. 

 

Focus/speed proportion pan

    When manually adjusting, for far focus situation, the dome responds at a high-speed so that 

touching rocker slightly may make picture move rapidly, thus cause the picture to lose. To base 

on humanized design, the dome automatically adjust pan and tilt rotation according to zoom near 

and far, which make it is convenient to operate manually to make tracks for the object. In the menu, 

you may change system parameter setting proportion pan as ON, thus you may run this function.

 

Magnification control

 

    The user can control  Wide/Tele  to  adjust zoom far and near of the image by keyboard controller to 

obtain panoramic image or close view that you need. The speed dome support digital zoom and optical 

zoom.

Focus control

     System defaults Auto focus. When the lens changes, camera will auto-adjust focus according to the 

centre of the image to get legible image; user also can manually focus to get desire image by operating 

keyboard  FAR/NEAR . When operating keyboard joystick, camera resumes to auto focus. 

         The camera cannot auto focus in the following status:

                   

Target is not the centre of the image

                   

Observation the target near and far at the same time, can not be clear at the same time.

                      

Target is a strong light object, such as spotlight etc.

                      

Target moves too fast

                      

Target is subfusc, such as wall

                      

Target is too dark or vague

                      

Target image is too small

"

"

"

"

4. 2  Camera control

 

Power up run

    By the menu

power up run

, after the dome powers up or restarts, user may set auto- resume 

motions before power up and auto- call preset or run tour,  pattern, and scan etc .

3

Ø

Iris control

        

System defaults Auto Iris. Camera can rapidly adjust size of Iris, through the automatically induct the 

changing of environment ray, and thus make the brightness of deferent image stable. 
          User may adjust iris by controlling keyboard  

 to get  required  brightness that you 

need. User also can resume auto Iris by joystick operation. When controlling the Iris manually, the dome 
locks current position you manually controlled; when operating joystick, the dome resume auto Iris.

Ø

Auto back light compensation

         Camera sub-area can carry out auto back light compensation. Under a strong light background, camera 
will auto compensate light for the darker object and adjust daylight to the bright background. In order to 
avoid making the image lack fidelity by the back line is too bright, and the object is unable to recognize 
because of darkness, thus gain legible image.

Ø

Auto white balance

        Camera can automatically adjust white balance in accordance with the alteration of background light-
ness to reach a true colour.

"OPEN/CLOSE"

4. 3  Monitor function

 

Tour

     Tour is the built-in function in the speed dome. It can appoint setting in advance, and make pre-
sets arranged in needful order in tour dwell. By inserting presets in tour dwell, to make the camera 
tour between these presets. Tour order can be programmed, each time you run tour, you can set park 
time. A tour can store 32 preset.

Scan

    User can easily preset right limit and left limit by controlling menu and menu, in order to make  
the camera scanned between right limit and left limit at a setting speed.  

Pattern

    Pattern is built-in function in the speed dome; the dome can record the tracks that are no less than 
180s, when running pattern, the dome moves repeatedly according to the recorded tracks. Each dome
can set up to 4 pattern.
   

Lens position display

    The position that the speed dome has finished to self-testing  as 0 point of pan rotation and tilt 
rotation. The pan range is 0-360

°

, and tilt range is 0-90

°

. According to the displayed information,

to set the position of camera lens, and the position can display on the screen.

    

Ø

 Set and call preset

        Preset function is that dome stores current pan/tilt angle, zoom and other position parameters 
into the memory. When necessary dome recalls these parameters and adjust camera to that position. 
User can store and recall presets easily and promptly by using keyboard controlling. The dome can 
store up to 128 presets.

Ø

Ø

Ø

Ø

4. 4  Constant temperature Function

            Inner temperature sensor surveille temperature inside of the dome. When the dome work in 
the high temperature, the dome will automatically to start-up the fan to reduce the heat, to make 
sure the dome work in the reliable temperature environment, increase its stability and prolong the
life time of the dome.  

   

4

Function Instruction

Summary of Contents for PX-SDH2010












Reviews: