7
ADDR
：
001-H
BAUD RATE
：
9600
PARITY
：
NONE
SOFTWARE
：
V1.03.0.RHAJDV
BACK EXIT
2.4.1.1 System information
Move the cursor to SYSTEM INFORMATION and then click the confirm button, you will see the above interface.
Here you can view the dome
’s basic information.
2.4.1.2 Address Information
Move the cursor to SITE INFORMATION and then click confirm button.
ADDR TYPE: There are two options: soft and hard. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set. Please click the OK button to confirm
ADDR-HARD: It is an address you can set in the dial switch. You cannot modify it through the software.
ADDR-SOFT: You can set address via software. It is to say, you can use menu to modify dome address.
The value ranges from 0 to 255.
BACK: Go back to the previous menu.
EXIT: Log out system menu.
2.4.2 Display Setting
Move the cursor to DISPLAY SETUP and then click confirm button, you can go to the third submenu. Please use
the left/right button on the keyboard or in the speed dome terminal menu to set. After completing the setup,
please click the save button to save current setup.
PRESET TITLE: Display dome preset title or not. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set. You can go to Function Setup->Preset section to set corresponding
preset value and preset title.
ADDR TYPE
：
HARD
ADDR-HARD
：
1
ADDR-SOFT
：
0
BACK EXIT
PRESET
：
ON
AZIMUTH DISP
：
ON
POSITION
：
OFF
ZOOM DISP
：
OFF
INSIDE TEMP
：
OFF
TITLE DISP
：
OFF
BACK EXIT