Qvis DLA6334, Installation And Operation Manual

Page: 28 / 32

22
5555 Keyboard C Keyboard C Keyboard C Keyboard Coooontrol NVS ntrol NVS ntrol NVS ntrol NVS
5.1
5.1 5.1
5.1 Connection
Connection Connection
Connection
Connect the network cable to the RJ45 network port of the keyboard, now you can implement
network control and upgrade.
5.2
5.2 5.2
5.2 Keyboard Setup
Keyboard Setup Keyboard Setup
Keyboard Setup
a) On the keyboard to set control point setup, Please refer to chapter 2.3.2. The link type
shall be NET.
Note
Please input NVS IP address and the default port value is 37777.
The protocol usually is DH-2. It is the network keyboard and the 2
nd
control keyboard
protocol. The DVR COM protocol is network keyboard protocol.
b) After the setup, click
【
ESC
】
to exit.
5.3
5.3 5.3
5.3 Operation
Operation Operation
Operation
5.3.1 Login
a) You can use ID, device name, or IP address to login the device.
b) On the keyboard click
【
ENTER
】
, you can go to the menu option interface.
c) Select control point.
d) Input ID, device name, or IP address and then click
【
ENTER
】
to search.
System automatically connects to the NVS if the search is successful. Please note you
need to input corresponding administrator password of the NVS to login. See Figure 2-10.
You can see the corresponding dialogue box such as the “IP address does not exist.
Please input again!” Please check the information and input again.
Tips
On the keyboard click
【
ID
】
and then input ID, click
【
ENTER
】
button to quickly find ID and
connect to the device you want to control.
5.3.2 Exit
On the keyboard click
【
ID
】
and then click
【
ESC
】
, you can exit menu.
5.3.3 1-Window/Multiple-Window Switch
On the keyboard, click a number and
【
AUX
】
at the same time to select corresponding
VGA port number. For example, click number
【
1
】
and
【
AUX
】
to go to video from the
VGA 1.
On the keyboard, click a number and
【
CAM
】
at the same time, you can go to the specified
channel. For example, click number
【
1
】
and
【
CAM
】
to go the channel 1.Or you can click
a number and
【
SETUP
】
to go to a channel. But the value here ranges from 1 to 9. That is
to say, you can go to channel 1-channel 9 only.