16
3.4
3.4
3.4
3.4
Operation
Operation
Operation
Operation
3.4.1 Login
The DVR local user has the higher priority than then keyboard user. Before you login,
please logout the DVR local menu user, otherwise, you cannot use the keyboard to
control the device.
You can select ID, device name, IP address, RS232, RS485 and etc to login.
a) Click
【
ENTER
】
on the keyboard, you can go to the menu options interface.
b) Select zones.
c) Input ID, device name, IP address.RS232, RS485 you set on control point interface, Click
【
ENTER
】
to begin search.
System can automatically connect to the DVR if the search is successfully. Please note
you need to input corresponding administrator password of the controlled device to login.
See Figure 2-10.
System pops up a dialogue box to remind you such as the address does not exist, please
input again. Please check the information and input again.
Tips
Click
【
ID
】
on the keyboard and then input ID number. Click
【
ENTER
】
to quickly find the
device.
3.4.2 Logout
Click
【
ID
】
on the keyboard and then click
【
ESC
】
to exit.
3.4.3 Playback
Click
【
PLAY
】
on the keyboard, you can go to the DVR search interface. Use joystick to control
the playback buttons such as stop, fast play, slow play and etc. Click
【
ENTER
】
to confirm. See
Figure 3-6.
Figure 3-6
3.4.4 Record
On the keyboard, click
【
AUX
】
and
【
1
】
at the same time
，
you can go to DVR record control
interface.
Use the joystick to set channel number and status. Click
【
ENTER
】
to save current setup.
3.4.5 PTZ Control and Video Color
On the keyboard, click
【
FN
】
and
【
1
】
at the same time, you can go to the DVR aux interface.
