![background image](http://html1.mh-extra.com/html/quvis/encore/encore_user-manual_3787786031.webp)
Configure the QuVIS Encore Network Settings
Network settings may be assigned using the front panel interface display. You will likely find it easier to
configure your network settings using a PS2 keyboard that may be attached to the front panel. You will
need to restart the system once the network settings have been assigned.
Network TCP/IP address settings may be manually assigned using the front panel GUI. Alternately, the
QuVIS Encore can use the DHCP (Dynamic Host Configuration Protocol) network service to receive its
IP addressing information (IP address, subnet mask, default gateway) from a network server. The
QuVIS Encore is assigned an unused IP address from a pool of TCP/IP address maintained by the
DHCP server.
DHCP provides safe, reliable, and simple TCP/IP network configuration, prevents address conflicts, and
helps conserve the use of IP addresses on the network. If the QuVIS server is connected to a foreign
network running DHCP, an IP address may be automatically assigned by the network without having to
request an IP address from a company’s IT department.
You will need to restart the system once the network settings have been assigned in order for the new
settings to take affect.
TIP:
Network settings are saved in non-volatile memory. In order to activate changes to network
settings, the QuVIS Encore must be restarted. Each time a network setting is changed, a prompt is
displayed asking if you would like to restart the unit now to activate the changes. If you need to
change multiple settings, do not choose to restart the unit until
after
the last setting is changed.
Modifying Network Settings
1.
Power on the QuVIS Encore.
2.
Navigate to the
SETUP - Network
menu page.
3.
To manually assign the
IP Address
, press the
SELECT
button to activate the input window.
Note:
You will likely find it easier to configure the network settings using a PS2 keyboard that may be attached
to the front panel even while the system is turned on.
QuVIS Encore
Page 30
QSR Version 3.1