E) If the product has been dropped or damaged in any way.
F)
When the product exhibits a distinct change in performance – this indicates a need of service.
Recommended Equipment Location
Physical Location
This product should be mounted upright on a desk, table or in an equipment rack using the optional rack
mount kit.
•
When locating this product on a desk or table, do not place it on either of its sides, or upside down.
Ensure that they table or desk is capable of supporting the weight of this unit (50lbs) plus the weight of
any additional equipment that is located with it. The shipping case of this unit is not designed to support
any external loads; do not place any equipment on top of this product.
•
When mounting this product in a rack, be sure that the rack and corresponding support components are
capable of supporting the weight of this unit (50lbs) plus any additional equipment that is placed in or on
the rack. Placement of this unit in a rack should be such that the rack’s mechanical operation (loading
and unloading) does not cause the rack or this product to fall. Use only those rack mount components
approved for use with this product by QuVIS, Inc.
Ambient Temperature and Airflow
The manufacturer’s rated operating ambient temperature range for this product, assuming unimpeded
airflow of four to eight meters/sec provided by the internal cooling fans, is 15
°
C to 45
°
C.
Failure to provide for adequate airflow into and out of this product, or operating this product outside the
recommended ambient temperature range, will cause a degradation of performance.
AC Power
Proper operation of this product requires that its AC power source is capable of supplying the AC input
requirements of this product. AC input requirements are listed on a label on the back of the unit next to
the power entry receptacle. Failure to ensure an uninterrupted source of AC power with the necessary
capacity may cause a degradation of performance.
Shielded Cables
Proper operation of this product requires properly shielded cables for fully compliant operation. The use
of unshielded cabling is not recommended.
QuVIS Encore
Page 12
QSR Version 3.1