Quorum The Windmill Floor Fan Installation Instructions Manual Download Page 8

Page: 8 / 8

6. TROUBLESHOOTING

FAN WILL NOT START

Check the main and branch circuit fuses or breakers.

THE FAN SOUNDS NOISY

1. Make sure all screws on fan motor assembly and fan guards are snug.

2. Make sure the blade and the blade cover are securely in place.

3. Allow a 24-hour “breaking-in” period. Most noises associated with a new fan
disappear during this time.

Warning

: Please unplug or disconnect the appliance from the power supply before

servicing.

REPLACEMENT PARTS

For replacement parts, contact your
local dealer.

Summary of Contents for The Windmill Floor Fan

Page 1: ...these instructions These instructions are to be used in the installation of the following QUORUM INTERNATIONAL fans The Windmill Floor Damp Location P O Box 961008 Fort Worth TX 76161 817 626 5483 FAX 817 626 5540 I0274 01 29 2019 Quorum International All Rights Reserved ...

Page 4: ...UR FAN 1 Balance the wooden feet swivel the cusion at the end of each foot to have the fan stand well Figure 1 2 You have now completed the assemby of your fan Plug cord directly into the socket Figure 2 Fig 2 Fig 1 ...

Page 6: ...ply before servicing Periodic cleaning of your fan is the only maintenance that is needed When cleaning use only a soft brush or lint free cloth to avoid scratching the finish Abrasive and or non abrasive cleaning agents are not required and should be avoided to prevent damage to finish Fig 5 ...

Page 8: ...sembly and fan guards are snug 2 Make sure the blade and the blade cover are securely in place 3 Allow a 24 hour breaking in period Most noises associated with a new fan disappear during this time Warning Please unplug or disconnect the appliance from the power supply before servicing REPLACEMENT PARTS For replacement parts contact your local dealer ...