3. OPERATION YOUR FAN
(continued)
SWITCH OPERATING INSTRUCTIONS
WARNING:
Do not manually move the fan head. Doing so
will destroy the gears in the oscillating mechanism.
It is recommended you test the fan before finalizing
installation. Test fan speeds with the speed control on the left
side of fan assembly. (Fig. 3)
0 = Turns the fan off.
1 = High speed.
2 = Medium speed.
3 = Low speed.
Test the oscillation function with the oscillation control on the
right side of the fan assembly.
OFF = Oscillation off.
ON = Oscillation on.
If fan doses not function properly, please refer to
“Troubleshooting” section.
ADJUSTING THE TILT ANGLE
Push the knob inward to unlock, tilt the fan body to desired
locations with 3 ANGLES(70°,90°,110°), position back the
knob to lock the fan. (Fig. 4)
Fig. 3
Fig. 4
Knob
