Q150T Sample Preparation System
Q150T - Instruction Manual
21
10473 - Issue 5
4
Working with Profiles
The operation of the Q150T is controlled by a profile. This describes the sequence of
operations in sputter coating or evaporation cycles. You can also create profiles to carry
out simple operations such as pumping or venting the sample chamber. Many of the
basic operations such as pumping, outgassing or venting the chamber occur
automatically as does the sequence in which they occur.
The Q150T is supplied with several default profiles to perform the basic and most
common operations (see Table 1). To make your own profiles, customised for your
specific applications, you can:
Edit an existing default profile
Create a new profile
4.1
Editing the Active Profile
To edit the profile currently selected on the standby screen, tap on the
Edit Profile
button. The editable parameters of the selected profile are displayed (see
Figure 4-4
).
Now refer to the
Editing Profile Parameters
section on page 24.
4.2
Profile Editor
To create, edit or delete any profile:
1.
Select
Edit | Profiles
from the menu bar.
Profile Editor
is displayed (see
Figure
4-1
).
Figure 4-1.
Profile Editor
Summary of Contents for Q150T E
Page 92: ......
