33
7. Installing the Cash Register
7.1 Dot Matrix Printer
7.1.1 Installing of Paper Rolls
Cut the edge
to be feed straight
like this
Do not try to feed
the paper if it is
like this
this way
not this way
1. Lift up and remove the printer
cover.
2. Load the paper rolls into their
respective receptacles. The end of
the paper roll must feed from
below.
3. Feed the end of the paper roll into
the paper entrance of the printer.
Press and hold the “Journal Feed“
key and feed enough paper so it
can be inserted into the slot of the
take-up reel. Wind two or three
turns of paper around the reel.
4. Now feed the end of the receipt
paper roll into the printer. Press
and hold the “Receipt Feed“ Key to
pass the paper through the
printer.
5. Feed the paper from below
through the paper slot of the
printer cover and reinstall the not
this way printer cover.